>- Selamat datang di website PT Fiqry Jaya Manunggal. Semoga anda senantiasa sehat afiat. Kami siap melayani anda
Fundamental of Machinary Lubrication
Rp 7.950.000| Stok | Tersedia |
| Kategori | Maintenance, Mechanical |
Trainer: Cecep Slamet Abadi, ST., MT
Bandung, 13-15 April, 2026
Bandung, 7-9 September, 2026
Bandung, 4-6 November, 2026
Fundamental of Machinary Lubrication
BACKGROUND:
Fundamental of Machinary Lubrication knowledge are very essential to those working on rotating equipment & maintenance. Bearings are machine components support and position the rotor of the machine to ensure they are in the correct position. Supported by proper lubrication and the availability of power then; The rotor rotates with the correct alignment; The machine is free from excessive vibration; The rotor and stator are free from excessive friction so that the power supply is still within the allowable reasonable range.
The rotor and stator are free from excessive wear with the above conditions, the chance of operational failure can be minimized. What is being so called catalist for those three components to works as human being wanted? It is a lubricant. Knowing all of these hence let’s have a deeper knowledge and make our operation & maintenance better.
OBJECTIVES:
- Understand the parameters and their effects on roller bearing and lubricant operations
- Understand how to properly operate and maintain roller bearings
- Understand the factors that cause lubricant degradation
- Be able to find the cause of failure and how to handle it
TRAINING CONTENTS:
- Fundamental lubrication
-
- types of lubricants
- friction and lubricant theory
- Oil
-
- viscosity
- measuring viscosity, temperature and pressure effects.
- Selecting & determining viscosity
- Additives
-
- additive contents
- additives in gearboxes, combustion engines.
- Grease
-
- selecting grease
- consistency
- NGLI grade
- additives in grease
- Pump lubrication system
-
- motor lubrication
- diesel engine and heavy equipment lubrication system
- compressor lubrication system
- steam turbine lubrication system
- Total maintenance solution – lubrication program
- How to plan a preventive maintenance program for lubrication
-
- how to make lubrication planning
- Determine lubrications interval
- Vibration phenomenon & problems caused by lubricants
-
- predictive maintenance
- case study: vibration analysis.
- bearing damage due to lubrication errors.
- Troubleshooting related to lubricants
- Wear on journal bearings
- Damage to bearings.
- Damage to gearboxes.
- Lube oil analysis.
- Reliability improvement on lube oil.
- Handling and storage of lubricants and Safety
WHO SHOULD PARTICIPATE?
Mechanical engineers, maintenance engineers and supervisors, service engineers and supervisors, work over engineers and supervisors, maintenance technicians & planners
TRAINER:
Cecep Slamet Abadi, ST., MT adalah salah satu associate instructor di FJM dengan latar belakang Pendidikan Teknik Mesin untuk jenjang S1 & S2.
Selain aktif sebagai dosen sejak tahun 1996, beliau juga memiliki pangalaman dalam bidang industry & konsultan di antaranya di LAPI ITB, Puslitbang Air, PINDAD, Audit Energi di Pertamina EP Pangkalan Susu, Tambung & Rengasdengklok, serta sebagai team uji kompetensi si IATKI (Ikatan Akhli Ketenagalistrikan Indonesia).
Untuk industrial training, Pak Cecep telah mengajar lebih dari 150 in-house maupun public training di antaranya: Indonesia Power, PLTA Saguling, Freeport-Papua, Chevron Oil/Gas, Chevron Geothermal, Premier Oil, Pupuk Sriwijaya, Pupuk Kujang, Badak LNG, dan lain-lain.
Related posts:
Tags: Bisnis Teknologi, Condition Monitoring, Predictive Maintenance, Preventive Maintenance, Proactive Maintenance
Fundamental of Machinary Lubrication
Gas Turbine & Compressor Operation & Maintenance
BACKGROUND: Gas turbines and compressors are critical components in various industries, including power generation, oil and gas, and petrochemicals. Their efficient operation and maintenance are essential for ensuring reliability, optimizing performance, and minimizing downtime. This training program is designed to provide participants with a comprehensive understanding of gas turbine and compressor systems, including their principles…
Rp 7.950.000
Maintenance and Reliability Management System (MRMS)
Background Dalam lingkungan industri yang semakin kompetitif, keandalan aset dan efektivitas sistem perawatan menjadi faktor penentu keberhasilan operasional. Banyak organisasi masih menghadapi tantangan seperti downtime tinggi, biaya maintenance membengkak, perencanaan yang lemah, serta rendahnya keandalan peralatan. Hal ini sering disebabkan oleh belum terintegrasinya sistem maintenance dan reliability secara menyeluruh. Maintenance and Reliability Management System (MRMS)…
Rp 9.500.000
Distributed Control System (DCS) Operation Maintenance
BACKGROUND: DCS (Distributed Control System) adalah suatu pengembangan sistem kontrol yang menggunakan komputer dan alat elektronik lainnya. Sistem ini dirancang agar dapat mengontrol loop system secara terpadu sehingga operator yang terlatih dapat mengoperasikannya dengan cepat dan mudah. Selain itu, DCS juga sangat cocok untuk digunakan dalam mengontrol proses atau peralatan di plant dengan skala menengah…
Rp 7.950.000
Vibration Analysis Methodology
BACKGROUND: This training is currently provided to teach the techniques and skills needed to perform Vibration Analysis in the shortest time and to increase awareness of its importance. Extensive teaching techniques and skills required to perform vibration in three-days “hands on” to increase knowledge to achieve the smooth-running machinery. You will learn how to analyze…
Rp 9.950.000
Remaining Life Assessment
BACKGROUND: Remaining life assessment (RLA) is an attempt to measure, predict the remaining life of an equipment, ie. a boiler or other critical equipment in a plant. By knowing the remaining life of an equipment or part thereof, technicians can plan replacement or repair. It is also very important aspect from safety, operation, and asset…
Rp 7.950.000
Operation Readiness, Hand Over & Assurance
BACKGROUND: Oil and gas facilities are among the most complex in the industry. Typically, these facilities are built by world-class EPC (Engineering, Procurement, and Construction) companies through subcontracting agreements. As a result, they must adhere to strict completion schedules. Consequently, effective collaboration among the Project, Commissioning, Operation Assurance, and Operation & Maintenance teams is essential….
Rp 7.950.000