Distributed Control System (DCS) Operation Maintenance

Table of Contents

BACKGROUND:

DCS (Distributed Control System) adalah suatu pengembangan sistem kontrol yang menggunakan komputer dan alat elektronik lainnya. Sistem ini dirancang agar dapat mengontrol loop system secara terpadu sehingga operator yang terlatih dapat mengoperasikannya dengan cepat dan mudah. Selain itu, DCS juga sangat cocok untuk digunakan dalam mengontrol proses atau peralatan di plant dengan skala menengah hingga besar.

Untuk mempermudah penggunaannya, DCS telah dilengkapi dengan tampilan grafik, seperti gambar analogi peralatan, serta perangkat lunak untuk konfigurasi kontrol. Bahkan, sistem ini dapat digunakan pada lebih dari satu workstation atau PC. Di samping itu, komunikasi antar perangkat dapat dilakukan melalui jaringan kabel maupun serat optik, yang memberikan fleksibilitas tambahan.

Namun demikian, mengingat kompleksitasnya, penguasaan yang baik terhadap sistem ini sangat diperlukan. Oleh sebab itu, training ini dirancang untuk memberikan pengetahuan yang memadai. Pelatihan ini akan disampaikan oleh seorang Doktor dan praktisi yang berkompeten di bidangnya, sehingga peserta tidak hanya memahami teori, tetapi juga penerapannya secara praktis.

RECOMMENDED PARTICIPANTS:

Process Control Engineers & Technicians, Automation Engineers, Operators & Control Room Personnel’s, Electrical & Instrumentation Technicians

COURSE OUTLINE:

DCS Introduction
Summary of typical distributed control systems DCS versus SCADA versus PLC
DCS System Elements
Data Communications in a DCS
The Basic Controller
Basic DCS Controller Configuration
Programming Of DCS Systems
Alarm System Management
Distributed Control System Reporting
Distributed Control System Configuration
Advanced Control Strategies Maintenance Considerations
DCS Maintenance

ABOUT THE COURSE LEADER:

Prof. Endra Joelianto, Ir., Ph.D., SMIEEE, is a distinguished expert in control engineering, with extensive contributions in fields such as Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust PID Controllers, Advanced Process Control, and Industrial Automation using PLC/DCS. He earned his first degree (Ir.) in Engineering Physics from Institut Teknologi Bandung (ITB) in 1990 and completed his Ph.D. in Control Engineering at The Australian National University, Australia, in 2001.

Prof. Joelianto serves as the coordinator of Intelligent Control and Automation and is the founder of the PLC Research Group at the Laboratorium Instrumentasi dan Kontrol (LINK), Department of Engineering Physics, ITB. He also founded and directed the Schneider-OMRON PLC Training Center at Maranatha Christian University, Bandung, in collaboration with PT. Schneider Electric Indonesia, PT. OMRON Corporation Japan, and Invensys WONDERWARE. His leadership in industrial automation is further reflected in his role as the project leader for DIKNAS TPSDP Retooling Programs and other initiatives focusing on industrial control and automation using PLCs.

Throughout his career, Prof. Joelianto has participated in and conducted numerous professional training programs on PLC, DCS, and instrument calibration. These include advanced training with organizations such as Yokogawa Electric Corporation, Fieldbus Foundation Technology, and ASPEN Tech. Additionally, he has provided training and consultancy for major universities and industries, including leading companies in the petrochemical, cement, oil and gas, and power generation sectors. His contributions have significantly impacted organizations like PT. Pupuk Kalimantan Timur, PT. Semen Gresik, PERTAMINA, British Petroleum, and Indonesia Power-Paiton, among others.

Distributed Control System (DCS) Operation Maintenance

Produk Terkait

Wells Performance & Surveillance

BACKGROUND: Effective monitoring and surveillance of well performance are critical to optimizing production, identifying operational inefficiencies, and maintaining the integrity of wells over time. Wells Performance & Surveillance is a comprehensive approach that involves the collection, analysis, and interpretation of data from wells to improve performance and decision-making. This training provides participants with the knowledge…

Rp 13.950.000

Tersedia

ROTATING MACHINERIES

BACKGROUND: Rotating machineries, or turbomachinery, involves a component that transfers energy between a fluid and the machine. This transfer can occur from the rotor to the fluid, making it a pump or a fan, or from the fluid to the rotor, making it a turbine. Examples of such machinery include fans, pumps, compressors, turbines, and…

Rp 7.950.000

Tersedia

Spare Parts Management

BACKGROUND: Spare parts management yang baik ibarat kelengkapan logistic dalam suatu pertempuran. Tahukah berapa kerugian yang diakibatkan karena kerusakan mesin atau peralatan yang tak terduga saat proses produksi berlangsung? Kemudian bagaimana jika proses perbaikan yang dilakukan terganggu karena ketiadaan spare part? Tidak hanya kerugiaan akibat loss production yang dapat dihitung, mungkin kerugian yang tak dapat…

Rp 7.950.000

Tersedia

Pengukuran & Alat Ukur Listrik Pembangkit

BACKGROUND: Pengukuran dan alat ukur listrik memiliki peran krusial dalam memastikan keandalan dan efisiensi operasi pembangkit listrik. Alat ukur ini digunakan untuk memantau parameter penting seperti tegangan, arus, daya, dan frekuensi, yang berdampak langsung pada kinerja sistem. Pemahaman yang baik tentang prinsip kerja dan aplikasi alat ukur listrik sangat penting bagi teknisi dan operator dalam…

Rp 7.950.000

Tersedia

Preventive & Predictive Maintenance

BACKGROUND: Paradigma bahwa maintenance yang selama ini dianggap bagian dari produksi telah berubah dan saat ini maintenance menjadi bagian dari strategi dan bisnis yang menentukan keberhasilan suatu perusahaan dalam menciptakan system perusahaan ber availiability tinggi karena efektifitas yang menyeluruh pada perusahaan ditentukan oleh availiability, sedangkan seperti telah diketahui bersama bahwa availiability ditentukan oleh lamanya uptime…

Rp 7.950.000

Tersedia

Hydraulic Fracturing

Hydraulic Fracturing (HF) is a reservoir stimulation to enhance oil and gas well productivity. In addition to its application in low-permeability formations, HF is also essential when formation damage occurs during drilling or when productivity declines due to water intrusion and other factors. This technology has become a critical component in the development of both…

Rp 13.000.000

Tersedia

Stok	Tersedia
Kategori	100+ Pelatihan Engineering & Migas Profesional 2026 \| Sertifikat Resmi, Electrical, Engineering, Instrumentation and Control, Maintenance, Production Operation

Distributed Control System (DCS) Operation Maintenance

Distributed Control System (DCS) Operation Maintenance

BACKGROUND:

RECOMMENDED PARTICIPANTS:

COURSE OUTLINE:

ABOUT THE COURSE LEADER:

Distributed Control System (DCS) Operation Maintenance

Wells Performance & Surveillance

ROTATING MACHINERIES

Spare Parts Management

Pengukuran & Alat Ukur Listrik Pembangkit

Preventive & Predictive Maintenance

Hydraulic Fracturing

Masuk ke akun Anda