>- Selamat datang di website PT Fiqry Jaya Manunggal. Semoga anda senantiasa sehat afiat. Kami siap melayani anda
Remaining Life Assessment
Rp 7.950.000| Stok | Tersedia |
| Kategori | 100+ Pelatihan Engineering & Migas Profesional 2026 | Sertifikat Resmi, Engineering, Maintenance, Production Operation |
06 - 08 April 2026, Bandung
27 - 29 Juli 2026, Bandung
Instructor: Ir. Deddy Nugraha and Team
Remaining Life Assessment
BACKGROUND:
BACKGROUND:Remaining life assessment (RLA) is an attempt to measure, predict the remaining life of an equipment, ie. a boiler or other critical equipment in a plant. By knowing the remaining life of an equipment or part thereof, technicians can plan replacement or repair.
It is also very important aspect from safety, operation, and asset management anticipation, not only when to replace equipment and how to maintain optimum life of the same.
OBJECTIVES:
After completing this course, participants will be able to:
- Understand the Principles of RLA
- Sources of Failure and Failure Mechanisms
- Understand the Procedures and Techniques of RLA using 3 (three) Evaluations: Analytical/Theoretical, Non-Destructive Tests (NDT) and Destructive Tests
RECOMMENDED PARTICIPANTS:
- Mechanical Engineer/ Superintendent/ Supervisor/ Manager
- Maintenance Superintendent/ Engineer/ Supervisor/ Manager
- Operation Manager/ Superintendent/ Supervisor/ Engineer
- Everybody who wants to add knowledge and interest in the above subject
COURSE OUTLINE:
- Principles of RLA
- Evaluation of Information from Failure Analysis and Damage Investigation
- Sources of Failure and Failure Mechanisms
- Determination of Material Characteristics: Strength, Hardness, Toughness, Creep, Fatigue, Corrosion, etc
- Procedures and Techniques of RLA using 3 (three) Evaluations: Analytical/Theoretical, Non-Destructive Tests (NDT) and Destructive Tests
- Selection of Critical Components by Direct Measurement on Operating Parameters and Data Bank
- Remaining Life Evaluation by Analytical/ Theoretical Method
- Remaining Life Evaluation by NDT Methods
- Remaining Life Evaluation by Destructive Tests Methods
- Case studies of the RLA Implementation on Various Industrial Components/Equipment
ABOUT THE COURSE LEADER:
Ir. Deddy Nugraha and Team
Ir. Deddy Nugraha earned his Bachelor’s degree in Mechanical Engineering from the Bandung Institute of Technology (ITB), where he specialized in Power Plant systems, including Gas Turbines, Steam Turbines, Pumps, and Compressors, with a particular focus on Reliability, Quality, and Maintenance Management. He has extensive experience, having served as a Senior Propulsion Engineer at Universal Maintenance Center PT. IPTN (1991–2002), and currently works as a Reliability Engineer and Professional Training Instructor.
As a training instructor, he has shared his expertise with various prominent companies, including PT. Tjiwi Kimia, PT. Suparma, PT. Indah Kiat Pulp & Paper, PT. Indonesia Power, British Petroleum, PT. Pertamina, PT. Krakatau Steel, PT. Amoco Mitsui, PT. Semen Gresik, Indocement Tunggal Prakarsa, PT. Puncak Jaya Power, Medco Energy, and more.
Remaining Life Assessment
Integrated Production Optimization of Oil & Gas
BACKGROUND: Dalam industri minyak dan gas, tantangan operasional yang kompleks seperti fluktuasi produksi, penurunan cadangan, dan peningkatan biaya operasional membutuhkan pendekatan terpadu untuk mengoptimalkan proses produksi. Pelatihan ini dirancang untuk memberikan pemahaman mendalam tentang konsep dan teknik integrasi dari reservoir, sumur, fasilitas permukaan, hingga jaringan distribusi. Dengan pendekatan ini, peserta dapat mengidentifikasi peluang peningkatan efisiensi,…
Rp 10.950.000
Well Completion and Workover
BACKGROUND: Well Completion and Workover are two activities in oil and gas industry, regardless it is oil or gas wells. Initial completion is the activities to allow production fluid to flow into the well bore and eventually flow to surface facilities. Workover carried out when the oil or gas production start declining overtime. Hence as…
Rp 13.950.000
Engineering Economic Analysis
PENDAHULUAN: Para insinyur, manajer teknik, atau bahkan semua orang akan dihadapkan pada dua lingkungan penting yang saling berkaitan, yaitu lingkungan fisik dan lingkungan ekonomi. Pengetahuan yang baik tentang lingkungan fisik akan banyak mendasari kemampuan seseorang untuk melihat, mengidentifikasi, dan mengendalikan konsep-konsep teknis. Dengan demikian, lingkungan fisik yang ada di sekelilingnya akan bisa digiring pada suatu…
Rp 7.500.000
Supervisi Pengoperasian Sistem BOP (Balance of Plant)
BACKGROUND: Pada pembangkit listrik tenaga uap (PLTU) berbahan bakar batu bara, areanya dikelompokkan menjadi beberapa bagian utama: Main Power Equipment, Balance of Plant (BOP), dan Coal Handling. Secara khusus, Main Power Equipment mencakup boiler, turbin, generator, transformator, dan kondensor. Sementara itu, BOP (Balance of Plant) meliputi beberapa sistem penting seperti Water Treatment Plant (MED, Mixed…
Rp 7.950.000
Operasi dan Perawatan PLTU
Background Manajemen operasi dan pembangkitan merupakan upaya memahami serta mengelola proses operasi sistem pembangkit tenaga listrik dan sistem penyaluran secara rasional, ekonomis, dan berkelanjutan, dengan tetap memperhatikan mutu, efisiensi, dan keandalan operasi. Pada Pembangkit Listrik Tenaga Uap (PLTU), keberhasilan operasi sangat dipengaruhi oleh efektivitas perawatan. Perawatan pembangkitan yang terencana dan dilaksanakan secara efektif akan meningkatkan…
Rp 7.950.000
Desain & Pemasangan PLTS
BACKGROUND: Pembangkit Listrik Tenaga Surya (PLTS) – Merupakan suatu fasilitas atau sistem yang mengubah energi matahari menjadi energi listrik. PLTS menggunakan teknologi fotovoltaik untuk menangkap sinar matahari dan mengubahnya menjadi arus listrik secara langsung melalui efek fotolistrik pada sel surya. Ini adalah salah satu bentuk energi terbarukan yang semakin populer karena sumber energi matahari yang…
Rp 7.950.000
